Operating procedures for metalworking-Assetprecision

The process of metalworking is to order steel from material suppliers according to the production needs. After the steel is ordered, it is cut. After cutting, test tolerances on the four sides. After testing, the production of small parts, such as small accessories, can be brought directly to the punch and then machined by CNC milling or CNC machining computers. There are many such details in the production of eyeglasses and auto parts. The container was almost cut. After punching can be directly burned welding. After sanding, you can start spraying oil and then assemble some accessories for shipment.

1. In the process of metalworking. The operator should maintain proper posture and be mentally equipped to handle the job. If you feel unwell, leave the post immediately to ensure personal safety, and report to the workshop supervisor or superior. In the process of operation, the operator must concentrate, do not chat, cooperate with each other. The operator shall not operate in a state of irritability and fatigue. For personal safety, avoid accidents and ensure operation stability. All employees should check their attire before entering the workplace. Slippers, high heels and influence clothing are not allowed.

2. Before the machine works, check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and make the machine idling for 1-3 minutes. Do not operate when the machine is faulty.

3. When replacing the mold, first turn off the power supply, and then start the mold installation and debugging after the punching press movement stops running. After installation and adjustment, move the flywheel by hand for two test runs. In order to avoid unnecessary collision between the machine and the product to be metalworking, it is necessary to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the flange holder is in a reasonable position.

4. Start the power supply and machine only after all other personnel leave the mechanical work area and take away the sundries on the work table.

5. During mechanical operation, it is forbidden to put the hand into the slider metalworking area, and it is forbidden to take the work part by hand. Use standard tools when removing and placing the workpiece in the mold. In case of abnormal sound or machine malfunction, turn off the power switch immediately for inspection. After the machine is started, one person should transport the materials and operate the machine. No one else should press the electrical structure or step on the foot switch plate. Do not reach into the metalworking area of the machine or touch the moving parts of the machine.

Assetprecision technology focuses on metal process solutions, which are widely used in toys, electronics, intelligent components, unmanned aircraft and vehicles.

Relevant