What are the details of the metal stamping-Custom metal parts - Custom Precision Metal Parts OEM/ODM Processing

Metal stamping process is a kind of metal processing method, it is based on the plastic deformation of metal, the use of die and metal stamping equipment to exert pressure on the sheet material, the sheet material plastic deformation or separation, so as to obtain a certain shape, size and performance of the parts (metal stamping parts). As long as we ensure that every detail of the metal stamping process should be paid attention to, we can execute the processing more efficiently. Improve efficiency and ensure the control of finished products.

The details of metal stamping process are as follows:

1. Before metal stamping, there must be plate straightening adjustment process steps or automatic correction tools to ensure smooth raw materials into the mold cavity.

2. The position of the material belt on the feeding clip shall be clearly defined, and the width gap between the two sides of the material belt and the two sides of the feeding clip shall be clearly defined and ensured to be implemented.

3. Whether metal stamping debris is promptly and effectively removed without mixing or sticking to the product.

4. The material in the direction of the width of the coil needs to be 100% monitored to prevent the poor raw materials from causing the bad metal stamping products.

5. Whether the end of the coil is monitored, the metal stamping process will automatically stop when the coil is rolled into the head.

6. The operation instruction shall clearly define the reaction mode of the product in the mold when abnormal shutdown occurs.

7. When the material belt enters the mold, there must be an error prevention tool to ensure that the raw materials can enter the correct position inside the mold.

8. Continuous die or feed die need to have step by step position monitoring, if the position does not go to the alarm or automatic stop.

9. The metal stamping die must be equipped with a detector to detect whether there is a product stuck in the die cavity, if there is a stuck, the equipment will stop automatically.

10. Whether the metal stamping process parameters are monitored, when abnormal parameters appear, the products produced under this parameter will be automatically scrapped.

11. Whether the management of metal stamping die is carried out effectively (planning and implementation of preventive maintenance, spot inspection and confirmation of spare parts)

12. Air guns used to blow away debris must clearly define the blowing position and direction.

13. There should be no risk of product damage during the collection of finished products.

Assetprecision committed to producing high-quality, precisely-made parts, and we take great pleasure in providing exceptional service to our customers and paying close attention to the details of every project, no matter how big or small.

What are the details of the metal stamping

Relevant